Upgrading the unit with a newer version of the system’s circulation pump
The newer version of the system’s circulation pump can be installed to units that contain the previous pump. Installing the new circulation pump ensures peak performance of circulating temperature control throughout the system’s root chambers. This step is not needed for system installation but it is highly recommended.
The Bifarm Raised Bed includes two root chambers that consist of 4 tubs where insulation is installed between the outer tub and the inner tub. The root chambers are housed and supported by a frame that unfolds in place. This video shows how to set up each Raised Bed tub. Starting from the frame, to tubs insulation and tubs and nozzle structure placement.
The grow bag is a lint free filter bag that is placed in the root chambers of the Bifarm Raised Bed. It keeps particles that can be released from plants during the growth cycle from entering the circulation system of the AeroXPS controlling unit. This video shows how to install and attach the grow bag in the root chambers and nozzle placement on nozzle structure.
The Bifarm Raised Bed recirculates nutrients from the root chambers to the AeroXPS controlling unit. This video describes how to install the connection on the bottom of the tubs that allows nutrient recirculation as well as nutrient delivery to the root chamber.
The Bifarm Raised Bed recirculates nutrients from the root chambers to the AeroXPS controlling unit. This video describes how to install the AeroXPS connections needed for nutrient recirculation as well as nutrient delivery to the root chamber.
The Nutrient Intake and Drain box connects with the AeroXPS controlling unit to allow for remote control of intaking and draining nutrients and water into the Raised Bed system reservoir. This video will demonstrate how to connect and install the nutrient Intake and Drain box.
The Bifarm Raised Bed system automatically controls most auxiliary equipment, such as lights, through the Power Switches connected to the AeroXPS controlling unit. This video demonstrates how to connect auxiliary equipment and the Power Switch with the Bifarm External Chiller.
Root Chamber, Climate Sensor, and Power Supply Connection
The Bifarm Raised Bed comes with several sensors that monitor environment conditions and root chamber conditions and reports these conditions to the GrowOS App. This video describes how to connect the root chamber temperature sensors, the climate temperature and humidity sensor, and the power supply adapter.
The Bifarm Raised Bed consists of a recirculation system within the AeroXPS controlling unit and External Chiller. The connection between these components must be insulated to help maintain root chamber temperature to the preset levels in the GrowOS App. This video describes how to insulate outside circulation tubes on the system.
To inquire more about Bifarm's Future Farm solutions you can reach us through our assessment page.